FUD CoD Monitor v3, Its finally arrived!!!

Yes, the long awaited version 3 of FUD's Cod (and now UO - AND NOW COD2!!) server monitor has finally arrived!

Download it from the Software Downloads link on your left there...

Its a self installing EXE file now (tech advances so you should no longer need any special DLL files to run it - if you do, let me know).

To save you reading this entire thread (though you should!), the current version of FUD CoD and UO server monitor is: 3.0F1.4 See the "edit" line below for the date of update

Cheers

This post has been edited by Dewed_up_Scope on Jun 3 2006, 07:19 PM

good to hear , i just need a server to test it on? but ive downloaded anyways, to wait for that day when im server admin again

Good to hear man. Remember to give the feedback though, good, bad or ugly. The best (and only one of 2 feedbacks - the other was constructive) was to say " Cheers Scoper, your program crashes less than most of the other Rcon progs"



Think I liked it...

Cheers

Good Job Dewed, i will be sure to download it and try out.

Hey dewed

nice proggie works gr8 on the server i run from home a couple of things is it supposed to run with all mods!?

as I use the Xtreme 5.1 and it the software wont read from the server on the( read all command) button ? just wondering?

If you run a server this is the tool ( needs a window for maps availible on server not just , rotation Then it Becomes KINGRcon

chow
Nov

Nearly fainted there. Software feedback!!!

Aye, I have plans to add a drop down menu for 'maps in the rotation', but looking for maps on the server would be more or less impossible without scanning all PK3 files for .BSP files (if someone knows a better way, let me know!). That wouldn't be fun to program or to use...

Was it the Read All button in the UO Setup page? The only Read All buttons that I can think of at 3:20am are the ones on the "Setup" page - ie, for normal CoD, not UO (under where you enter your server details and the boxes all say 'Text' ). This, if you read the instructions, hasn't been implemented yet

Guess I should stop writing other stuff and get on with getting a final version of this out...

Cheers for the feedback. I have no way of counting how many people use my software, so feedback, comments and "Hello I'm using your software and it sux" messages or emails is the only way I know that anybody but me is using it!

Cheers

Hello Oh Scoped One

Yeah its the setup next to pbsetup m8
I just tested it there and nothing reads
either "read all" or read hope this helps you
infact i'll Email you the rcon password you can
try it for your self Dewed k cya

TheNov

Read All (of the instructions) Or even the last post

That Setup is not working yet Only the UO setup works at the moment.

First few sentences of the *cough* instruction tells you that.

lol

Cheers.

OOps! sorry dewed


but i never read the instructions specialy with your stuff you make it so easy!
So naturaly i seen a whole page dedicated to ( SET UP ) I naturaly thought it would work or why show it you know !

But no your rite m8 i should read the instructions on everything No matter who! writes the Stuff
And in that case your software works gr8 apart from the SETUP which by your design is there just for show lol ;-/

TheNov

Updated FUD Monitor 3 today when I noticed that if a player name contained an ampersand (thats an "&" for those that dont know) the name went a bit screwy and didn't display properly.

I forgot that people can use ampersands in their name and hence missed that this error would occur. Fixed it now.

Also have removed all the stuff that is not implemented yet (you were right Novice, but I was lazy ).

Cheers.

FUD CoD (and UO) Monitor 3 is now Beta 3!

Update includes:

Multiple repeating messages - Store up to 999 messages and let the software display as many as you want and in any order you want!!!

Change map - Lists ALL maps on your server, selecting the map will change it on the server! Its that simple. If Gametype is blank, the current gametype will be used, if not the gametype is changed too!

Restart and rotate map does what it says on the tin!


This is as a result of me finding a loyal comrade using a rival (and rubbish) CoD RCON tool Feedback what you want to see folks, not settle for the naff copies of the best just because there is a feature in it! Nothings impossible if you nag me!

Just fixed a bug in the messaging system where it printed 1 more message than you asked it to, if you restricted the messages to less than the stored amount. Fixed now - apologies

Cheers.

This post has been edited by Dewed_up_Scope on May 20 2005, 01:04 AM

[FUD] monitor 3 is now Beta 3.1!

I have updated the Repeat Message system to include an Edit button and ad-hoc 'set next' (message to display) button.

Also added control for "Friendly Fire", "Kill Cam", "Team Balance", "Spectate Enemy", "Free Look" and "Death Chat". Kicks and bans now skip the server command queue to make it fast at doing this function.

Finally, I've moved the map list to the Commands tab (popular demand), sorted the list alphabetically and put a button in to change - too many accidents with the single click.

Enjoy.


P.S. I'd better explain the Team Balance thing too as I still have not updated the instructions... If Auto Team Balance is set, there will be a number beside the tick. This is the number that Team Balance is set to and the allowable difference in team numbers. 1 is normal. This means the teams can be 9 v's 10 and all is OK, but not 8 v's 10.

If you change this number (max 9 - by me) then it becomes the allowable difference in the team numbers. eg, if set to 3 then 7 v's 10 is OK, but not 6 v's 10. Hope you get the idea.

Also, clicking the radio buttons or the tick boxes (or changing the team balance value) changes the server values! You don't need to click a 'set' button or anything.

Very well my man i'm downloding now har har

Tatties

Just fixed a bug introduced by making the kick and ban skip the command queue

I'd recommend downloading again, but I'm going to make a push to finish this in the next day or two, so just wait until then

Cheers

Amid a fanfare of trumpeters (above), I have the proud honour of letting you know that FUD Monitor 3 is now FINAL Release 1!!!

Whats does this mean? It means its FINISHED!

All the CoD game type and weapon setup features are there (at last) as well as a server config execution function! Execute any cfg file on your server with the click of a button!

Download, admin and enjoy!

Cheers.


PS. If there are any oddballs who stumble across these pages or who don't go through the web site to get here, you can download it from

http://www.fud-clan.co.uk