Title: Broken Engine Mounts + Pics
Icarus - October 31, 2005 07:29 AM (GMT)
The car was a bit rough at start up and when I stopped the engine. I had it suggested to me that it might be the engine mounts. I replaced them and as you will see below, it was worth it. The car is WAY smoother on start up, stop and idle plus I'm not running the risk of it falling out of the front of the car when I get on the brakes.... Might be worth checking yours as I am told it is a pretty common problem with the tezz.
This is the one in best nick of the two
greeneyes - October 31, 2005 07:50 AM (GMT)
Ouch!! That's pretty torn up!
Too many drag racing starts??
I haven't come across it before.
black200 - October 31, 2005 12:50 PM (GMT)
fark...my car has started to get really rough on shut down and idle.... i was thinking of getting them checked.
didnt know it was a weak point.
thanks for the heads up though
SSML - October 31, 2005 09:42 PM (GMT)
r they total of 3 mounts for tezza? how much are they? must be not cheap to replace...
Icarus - November 1, 2005 10:35 AM (GMT)
There are two of these mounts on the engine. One Left (Below exhaust manifold) and one right (Under intake manifold). I got the new mounts for $145 nz each (trade). The genuine Toyota ones were actually cheaper than the after market ones.
Mr Singh - November 1, 2005 10:41 AM (GMT)
C-Ones and TRD do uprated ones.
But oh man, that looks scary :o
z3ak - November 3, 2005 12:02 PM (GMT)
that does look scary....maybe i should get mine checked out
Thunderbird2 - November 10, 2005 05:11 AM (GMT)
Glen here in Sydney with the TRD RS200 has TRD engine mounts (naturally!). You can really notice them through the seat when you turn the car over - the vibration is not really audible, but i found it more noticable than stock. Strictly a 'seat of the pants' measurement. Makes the car feel quite tough!
Piston - January 10, 2012 03:56 AM (GMT)
these Altezza engine mounts are the same as the IS300 engine mounts??
I have the same problem and I need these mounts asap
Thanks in advance
Geoff897 - January 10, 2012 09:30 PM (GMT)
Just noticed you have a Altezza not IS200 so they are not interchangable
Here are the part numbers for both
GXE10 JCE10 12361-46190
Piston - January 12, 2012 03:46 AM (GMT)
and the is300 mounts neither?
Geoff897 - January 12, 2012 03:48 AM (GMT)
Part numbers indicate IS200 and IS300 are the same and the SXE10 Altezza are different.
chukatsung - January 12, 2012 07:21 AM (GMT)
How do you check if the engine mounts need replacing?
Piston - January 12, 2012 08:15 PM (GMT)
One of my engine mounts are broken, do you have pics of the I300 motor mounts??
Geoff897 - January 12, 2012 09:20 PM (GMT)
Google is your friend
Piston - April 2, 2012 11:03 PM (GMT)
I have problems with my clutch, sometimes, not all the time, when I wanna start moving in 1st gear the car begins to shake, but some friends and mechanics told me that probably this issue happen because of broken engine mounts.
Your comments please.
I need one more suggestion, does anyone know where to buy both engine supports?? I couldnt find in ebay, the only mounts Ive found are for IS200/IS300,
I live in Lima Peru.