UPDATED - 15/11/2010

All parts are all Genuine New!

For those who are unaware, these are exactly the same as the TRD High Performance Big Brake Upgrade Kit except for the red paint and the TRD logo!

Kit will include the following:
2 x Front Supra 4 Piston Calipers
2 x Front 323mm Supra Brake Discs
1 x Genuine Front Brake Pads
1 x Fitting Kit (pad clips and separator springs etc)
1 x Anti-shim kit (brake pad backing)

How much?:

RRP
$3379.79+GST NZD at RRP!!!
VIP Members:
$1070.00+GST NZD
STD members:
$1500.00+GST NZD


Shipping:
NZ:
$10.00 via NZCouriers Within AKL
$48.00 via Parcel Post anywhere in NZ
Aus:
$180 NZD via normal Air Post (3-10 working days) - Untracked but Uninsured
$240 NZD via EMS Int Eco Courier (2-6 working days) - Tracked and insured

Fitting:
FigsProps do the press in adaptors for $95USD
http://www.figsprops.com/brake.htm (right at the bottom of the page)

Of course, there will be shipping ontop of those prices unless your picking up from North Shore, Auckland

Fitment:

Probably won't fit behind the stock 17" wheels without spacers

Pic:

I recently got a set of these brakes, and I can definitely say they are worth the money. They aren't just a little better, its like night and day!

2 x RH Calipers arrived during the weekend, the LH Calipers are still on the boat :(

Here are some pics with a Bic Pen so you can see the size of these!
(yes I label my pens... trust me, its a MUST lol)

More Supra TT Parts have arrived!
323mm Rotors:


Brake pad fitting kit:


Brake Pads:


Just waiting on the Left Hand calipers now, apparently due on the 26th this month

Wait till Shane comes back from holidays, I think he was interested in some bbks as the rotora order fell through.

keen but no money :(

How much for just the calipers and fitting kit?

$700 including gst for the 2 calipers and fitting kit :)

im keen im going to need them just to sort money out and stop blowing gearboxs

First 2 kits have been sold, got another 2 kits on order due in about a week.

1 of the kits is for mapple (Sean) and another for stock :D

Hmm hmm hmm!

Will get back to you Nick I may be keen!

LOL no worries Shane :)

Got more in stock now got 2 extra kits here :D

So has anyone gone with the supra 2 pot rear conversion also?

Not that I know of, as our rear calipers are already 2 pot so no point in upgrading just for the look?

Are the calipers from a Supra or are they an after market upgrade for a Supra?

They are actual OEM supra calipers, not after market ones.

Correct they are the largest in the Toyota family that will fit on our cars, found stock on the 6MT 2JZGTE JZA80s (RZ Spec).

Exactly the same as TRD High Performance Brake Kit's calipers! You really gotta drive a car with them fitted to appreciate them for yourself!

Bump - only 2 sets left!

Tempted. Especially with the crap drivers around, better stopping power is always a bonus!

Can i put one on lay-by? :D

Err, these don't fit behind stock 17's without spacers? :(

correct. 15mm from memory

you'll need to certify them anyway, so spacers isnt an issue.

just make sure you do a heap of mods and cert all at the same time for max value for money!

Correct me if I'm wrong but don't you only need a cert if you modify the braking mounting points (or use custom adaptors etc) or the knuckles to suit? Where these can be fitted without mods bar the press in FIGs adaptors?

And if you use engineered spacers with new studs inside the spacer no cert for those aswell?

Might be wrong :P

People who have gotten these kits from me so far have yet to have any problems with WOFs that I know of :S

Spacers and adapters: You will find they are required to be certified by the letter of the law (bearing in mind i'm talking about NZ here, not AUS)

Read: http://www.lvvta.org.nz/stdWheels&Tyres.pdf

Specifically section 2.5(1) Points A through F


Brakes: check out http://www.lvvta.org.nz/stdBrakes.pdf

In short - you need to to certify if you modify any part of the braking system to anything that isn't OEM fitment spec

Sure people might not have issues, all depends on who is issuing the WOF. You flout it at your own risk

To be honest, if the supra logo was painted over you would be hard pressed to know the factory calipers had been changed. As for the figs adapters, they replace the original press in threads so you wouldn't know any different as they look factory. I believe that's why people have so little problems passing wof with the supra bkk.

Just a quick question, what have these kits got regarding the automagical 4 channel ABS system? are these just stripped of the sensors etc?

The ABS/Speed sensors sit into the hub and work off a ABS Rotor gear inside.

ABS will still function as normal :)

Hey Nick
Im overseas for a few weeks but will buy a set when i get back

Cheers

Not a problem down to my last set again.

hey nick, any more stock left of these, my friend may be interested

cheers josh

Got 1 complete set here set aside for Sean (mapple).

Got 3 other sets here, just waiting on the left calipers to arrive to complete the kits but yes more available

Hey Nick, might be interested in a set soooonish few Q though
1. Can you get the TRD Rotors? $$ extra?
2. TRD decal? ;)

Thanks mate.

Here is what the TRD discs RRP at:

These are to suit the Supra BBK, can do the standard Altezza sized discs at the same price too (below)
I got a RH disc on order now ex japan, but got the LH disc in stock

I can do them at:
Non VIP - $364.00+ each
VIP - $350.00+ each
(all in NZD)

Depends on what TRD Decals your after, some examples here:
http://trdparts.jp/english/parts_sticker.html

Great thanks for the prices mate :)

You have room for another order of the supra calipers+TRD rotors?
Will take a set if available

Sure do, LH TRD rotors currently on order ex Japan though, should be here in a fortnight max I think.

Send me an email to the work addy and I'll hit you back with further details

tempting.....

I am interested but haven't got the $$ at the moment. There are a couple of things (clutch, cambelt, lowering, tints and mags) that I would like to do to my car beforehand.

I am pretty keen on this kit, has anyone is Sydney got them on their car? i would love to have a look at them in the flesh to check out a few things?

i forgot to ask are these the same as celsior calipers?

yep :)