Well, I have decided to take the car back to N/A. This way it will open the market up to "P" plate drivers. As we all know even in N/A it is still a weapon.
Everything will stay on the car as is except for the turbo install so it will be basically sold with a stock exhaust or whatever I can get in the way of an exhaust system.
In N/A form I will be asking $20,000. If the interested buyer would like to retain the Power FC for future tuneability then add $800 to the price.

Price drop to $19,000 in N/A form.

Make that $18500 in N/A form (We have picked the house we want).

Grats on the house, good luck on the sale! :D

I wanna see some details! The house that comes before the car!

Well Troy you saw the house Iv'e got now so anything would be an upgrade.
The house is just your basic 2 story 4 bed item, nothing special, just new.
Why don't you buy my Tez in N/A form.....you know you want to :P

someone buy my car!! ill buy this ;)

Yeh i know i do!! even without the turbo the bodysetup on that thing is crazy! It would be nice to have a rare car in Aus, feels like every 2nd car i see is a isx00 :(

I promised myself that my next car would be a 2 door rotary though lol

:( damn man.....

totally understand though!

RX-2 Coupe? :P

or an r100

Continue Rotor convo here:
http://z4.invisionfree.com/lexusaltezzaclu...?showtopic=9515

Dont wanna fill up Cookies sale thread!

will the turbo kit be retained until a NA buyer comes along? and how much now for the car as a complete package? How hard would it be to engineer?

The turbo is still on and will stay on until I can get the parts together to convert back to N/A. To buy now as is I'm asking $22,500 as far as engineering goes it is not hard to get it done. I have some contacts that can get it done (all legal), they just know how to go about it. The cost to engineer it would be approx $1000 which is for engineers fees etc. If you are interested give me a call 0404028237.
The reason I haven't had it engineered is that the contacts I have are all out near Penrith and I just can't find the time, living at Cronulla they are a long way away. These are they same guy's that IS1000 uses for engineering so you know they are good and all above board.

Price drop to $21500 in turbo form.

Bump, about to sign contracts.

Congratulations man! and good luck with the sale

Farewell my friend, and be sure to direct the future owner to these forums.

Definately a one of a kind in Australia, wish I could have bought it. Definately would have swapped mine if I could, I'm getting power hungry now.


OH btw we dropped the idea of the CF bonnet??

Thanks guys.
Haven't completely dropped the CF bonnet idea, just wth the Xmas break and all thats going on with the house it's just been on the back burner for a bit. If you guy's are still keen we can get something happening. I keep getting emails from them asking how things are going so it's still alive.

I'm still in bud :)

Got another email from them last night. I replied to them stating that I should be able to put in the order in the next couple of weeks. Let me know if this is ok so we can arrange the funds.

Friendly Bump :)

if only I have 20K to spare..I would buy this and put all my fast bits from the yellow and sell the yellow on stock form.

free bump.

No offence Reggie but what fast bits do you have that mine doesn't? Get the stock stuff and sell your's stock and then sell all your fast bits ;)

technically their handling bits but they help me go faster on the track.

Supra Brakes
DBA4000 rotors
BuddyClub N+
Cusco Front Camber Arms
Cusco Front and Rear Sways
Cusco Rear Underbody Bracing
Greddy Front and Rear Struts
Bride Ergo2
Harness Kit
LMGT4
TRD Shortshifter

as you can see I just need a good engine to go with the car. ;)

Reggie you should see the bracing on Cookies Altezza! there are braces that i have never seen before on it.

When we jacked up one corner of the car 3 wheels lifted off the ground! Epic!

this thing is crazy stiff!! every brace u can think of!

Final price drop to $19500. Someone must want this.
This price not negotiable.

Just post up it is sold, then the buyers will come out of the woodwork!

I recently had my bike up for sale on bikesales, and had 2 buyers within 2 days. Since I had so much interest so soon I decided to wait and seek just under my asking price instead of accepting an offer $1500 below my inflated asking price.

I waited 2 months with the only interest being from paypal scammers and 16 y.o dreamers. So I bit the bullet and struck up a deal with frasers to trade my bike in the following weekend after taking an aprilia for a test ride. A few days later I had 2 willing buyers come out of nowhere, an ended up selling the bike the day before I was due to trade it in! B)

Shane, CRAP, I completely forgot about the Halos. Mate I'll get them in the post for you. Lots of things going on with the house and I also just got a new job so the brain has been a bit scrambled lately.
Someone will eventually buy it, hopefully sooner than later.

No worries mate figured as much! No major rush for them, but they would be nice to have :)

Well normally a N/A altezza in oz fetches $20-25k. An altezza that is putting out as much power as yours should have sold within weeks! :huh:

Steve,

You will be the first person I call when I rob a bank! :lol:


I'd so buy this man... its got me f*cked how you still have it? personally I think its worth $25K or there abouts!

Well hurry up and rob a bank cause I'm thinking about swapping it for a GT4 N Spec ST246 Caldina.

Why though?

Altezza is perfectly suited to family duties! :)

Pretty much sick of driving a manual in traffic and I would like to have 2 cars that my Wife can drive. The reasons are probably a bit lame but that's the way I want to go.
Besides that I don't take it on trips cause the family don't like the exhaust note or the firmness of the suspension. I don't really make use of the performance and handling so I may as well sell it to someone that will.

thats understandable then..

shame though! :(

Bumpity bump, Is there no-one that wants this? I can't believe it hasn't sold.
I am now includung most parts to take it back to N/A if any "P" platers are interested.

hey dude very keen on this
would be able to send me a list of whats done to it ;)
cheers

Price now $18500 in turbo form.

Please take my kidneys as payment?