[fs] Greddy Turbo Kit (parts), Wgtn, Nz

I aquired the below item when I purchased my car and they are now surplus to my requirements, I have decided I am sticking to N/A.

What you see (in the pics) is what I have / got given (excluding the down pipe which I will add pics of). Turbo was rebuilt by previous owner, none of these parts have been fitted to my car (have been sitting in the box)

Am looking for $1300 for the lot.

will try add the other pic tomorrow. Any questions PM or reply here.

Cheers
Blair

Interested in manifold only if you end up splitting or someone wants the rest for some odd reason

No ECU I take it?

I can supply the installation kit instructions in pdf for anyone who needs it. You can use google translate to convert japanese to english.

Bry - would like to keep together at this stage thanks but will keep that in mind

silverhelix - correct

Can anyone comment on the cost of the ecu & harness?
What should one budget for in regaurds for tuning?

This is very temping =D

greddy blue is about 700aud then you would need a harness and then a tune. the kit only comes with a patch harness that you need to patch into your harness but a plug and play is available.

Dont go down this route though, you would be much better off going with a powerFC 1000K+ but you would still need a tune.

OR you could buy my harness + emanage (never been used ever still in box and comes pre tuned for this set-up) for $750 AUD

Hey man. I have a e-manage blue lying around in the cupboard somewhere if your interested.

It was in my car when I bought it, but never really ran very well in my car tho.
Probably because we didn't have any 98 fuel back then - was running kinda lean and I don't really know if its tunable.
On 98 its more than likely fine the way it is - so if you decide you want it, give me a bell

Cheers Corey

If you part it out il take the map sensor pipe desperately need one

down pipe images

Wow the ceramic coating on these Trust downpipes are second rate by the look of it

What size is the oil drain tee mate?

Stuck in the office today, will take a look tonight for ya.

Particular dia's you are interested in?

Just wanting to know what size the straight through piece is I suspect it's 20mm and the tee part should be 16mm just wanting to confirm it. Cheers man

If it's any help I'm running 16mm on mine and it's fine.

Is that the standard size from factory bry that's all im interested in as I can't get my hose off to check the size thanks in advance man

i have a b/new blue emanage that i was gonna slap on my car.. i willing to let it go for $250aus plus shipping if u need an ecu =)

cheers

romeo

You mean the stock line where the turbo oil drain taps into? It's all 5/8 hose so yeh.. should be 16mm ID or there abouts.

Sweet as man cheers for that thought It was closer to 20mm

supertezz - did that answer your question?

I had one of those weekends moving friends & totally forgot about taking a look.

Yea but out of curiosity what size is it as I now have had to conflicting sizes

As above & using a metal rule 16mm or there abouts

Cheers man your a legend

Hi there, can you email me the kits installation instructions in pdf format? sportyben14@hotmail.com cheers

done